Skip to content

0980106110 BPW Compatible Brake Caliper Pin Dust Boot

3970 Views Updated
Product details
Caliper
  • KNORR-BREMSE SB6
  • KNORR-BREMSE SB7
KNORR-BREMSE
  • II328090061
EAN Code8683457006355
Ready to Order
Summary

This Brake Caliper Pin Dust Boot is an equivalent for BPW components. Designed for heavy-duty air disc brake systems, it ensures the protection of caliper pins against environmental contaminants and maintains smooth movement within the braking mechanism. Equivalent to OE BPW 0980106110.

Get Information

Compatible OEM Codes

  • SCHMITZ CARGOBULL
    • 18077
    • 17155
    • 15649
    • 15422
    • 018077
    • 017155
    • 015649
    • 015422
  • MERCEDES BENZ
    • 050 121 06 56
    • 001 420 52 83
  • MAN
    • 81.50822.6008
    • 81.50822-6008
  • BPW
    • 09.801.06.11.0
    • 09.801.02.60.0
  • SCANIA
    • 1415150
  • NEOPLAN
    • 11014050
  • KNORR-BREMSE
    • II328090061
  • IVECO
    • 93162049
  • FRUEHAUF
    • M100926
  • DAF
    • 1448914

Description

What does a brake caliper pin dust boot do?

This brake caliper pin dust boot serves as a critical protective component within the air disc brake system. It is engineered to seal the caliper pins, preventing the ingress of dust, water, and road grime into the sliding mechanism. By maintaining a clean environment around the guide pins, this component helps prevent seizing and ensures consistent braking performance under heavy-duty conditions.

Compatibility and application

The part is designed for compatibility with BPW systems. It provides a reliable seal that accommodates the axial movement of the caliper pins during braking cycles. This specific component is essential for maintaining the integrity of the air disc brake assembly in heavy commercial vehicles.

Installation and maintenance guidance

For proper installation, technicians should ensure that the caliper pins are thoroughly cleaned and lubricated with high-temperature grease before fitting the new dust boot. Regular inspection of these boots is recommended to detect any signs of wear or tearing caused by road debris or extreme temperature fluctuations.

Troubleshooting and system health

Maintaining clean and intact dust boots is vital for preventing uneven brake wear and ensuring the longevity of the entire braking system.

OE cross-reference

3551032 (Brake Caliper Pin Dust Boot) is the equivalent of the BPW OE number. This part directly replaces BPW OE number 0980106110.

Compatible Vehicles

Compatible Vehicles
BrandModelModel TypeEngine
BPW
DAF
FRUEHAUF
IVECO
MAN
MERCEDES BENZ
NEOPLAN
SCANIA
SCHMITZ CARGOBULL

Vehicle and Engine Pages

Other OEMs

BPW

  • 0980106110
  • 0980102600
  • 09.801.06.11.0
  • 09.801.02.60.0

DAF

  • 1448914

FRUEHAUF

  • M100926

IVECO

  • 93162049

KNORR-BREMSE

  • II328090061

MAN

  • 81508226008
  • 81.50822.6008
  • 81.50822-6008

MERCEDES BENZ

  • A0501210656
  • A0014205283
  • 0501210656
  • 050 121 0656
  • 0014205283
  • 001 420 5283
  • 050 121 06 56
  • 001 420 52 83

NEOPLAN

  • 11014050

SCANIA

  • 1415150

SCHMITZ CARGOBULL

  • 18077
  • 17155
  • 15649
  • 15422
  • 018077
  • 017155
  • 015649
  • 015422

FAQ

What is the function of a brake caliper pin dust boot?
The boot acts as a seal to protect the caliper pins from dirt, water, and grit, ensuring the pins move freely within the braking system.
Is this part compatible with BPW systems?
Yes, this component is designed as an equivalent part compatible with BPW systems to ensure proper sealing in air disc brake assemblies.
How can I tell if a dust boot needs replacement?
Inspect the boots for cracks, tears, or signs of debris ingress; worn boots can lead to pin seizure and uneven brake wear.
Should I use grease when installing new boots?
Yes, applying high-temperature grease during installation is essential to ensure smooth movement and provide additional protection against moisture.
What are the OE reference numbers of this part?
3551032 directly replaces BPW OE number 0980106110.