012999702 WABCO Equivalent Brake Caliper Pin Dust Boot
| Caliper |
|
|---|---|
| WABCO |
|
| EAN Code | 8683457005846 |
Ready to Order
Summary
This Brake Caliper Pin Dust Boot is an equivalent for WABCO PAN 17 systems. It is designed to protect the caliper guide pins, ensuring smooth movement and preventing seizure within the air disc brake caliper assembly. Equivalent to OE WABCO 012999702.
What's in this kit
-
4001001 Brake Caliper Pin Ø 30 / 91 mm
-
4001002 Brake Caliper Pin Ø 30 / 77 mm
-
4004001 Brake Caliper Pin Bolt M16 x 1.5 / 90 mm
-
4004002 Brake Caliper Pin Bolt M16 x 1.5 / 70 mm
-
4005001 Brake Caliper Pin Bushing Ø 30 x 34 / 20 mm
-
4005002 Brake Caliper Pin Bushing Ø 30 x 34 / 25 mm
-
4015001 Brake Caliper Pin Cover Ø 34 / 17 mm
-
4002002 Brake Caliper Pin Dust Boot
-
4002004 Brake Caliper Rubber Plug
-
4002001 Brake Caliper Tappet Dust Boot
-
3524003 Grease 7 gr
Kits that include this kit 4
Compatible OEM Codes
-
WABCO
- 12 999 702
- 12 999 699VT
-
DAF
- 1436853
- 1346853
-
OTOKAR
- 13C3508276AA
-
IVECO
- 42536957
Description
What does a brake caliper pin dust boot do?
The brake caliper guide pin dust boot is a critical component within the air disc brake system. Its primary function is to seal the guide pin, keeping it properly lubricated while preventing moisture, dust, and road debris from entering the mechanism. By maintaining this seal, the part prevents pin seizure and uneven braking performance.Compatibility and fitment
This specific dust boot is compatible with WABCO PAN 17 systems. It serves as a high-quality equivalent for maintaining heavy commercial vehicle braking assemblies. It is engineered to withstand the harsh environmental conditions encountered in heavy-duty service.Maintenance and installation
During routine brake maintenance or pad replacement, technicians should inspect these boots for cracks or tears. Replacing worn boots is a cost-effective way to ensure the caliper pins remain free to move, preventing more expensive repairs to the caliper assembly itself.Preventing system seizure
A properly seated boot ensures the longevity of the braking mechanism components. For precise fitment and optimal performance in air disc brake calipers, always check compatibility with your specific system requirements.OE cross-reference
4051001 (Brake Caliper Pin Dust Boot) is the equivalent of the WABCO OE number. This part directly replaces WABCO OE number 012999702.Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| DAF | |||
| IRISBUS | |||
| IVECO | |||
| OTOKAR |
Vehicle and Engine Pages
Other OEMs
DAF
- 1436853
- 1346853
IVECO
- 42536957
OTOKAR
- 13C3508276AA
WABCO
- 12999702
- 12999699VT
- 012999702
- 12 999 702
- 12 999 699VT
FAQ
What is the function of a caliper pin dust boot?
The dust boot seals the guide pin to keep grease inside and contaminants like dirt or water out, ensuring the pin moves freely.
Can this part be used with WABCO PAN 17 systems?
Yes, this part is designed as an equivalent for WABCO PAN 17 air disc brake caliper systems.
When should I replace the dust boot?
It should be inspected during every brake service; replace immediately if any cracks, tears, or loss of elasticity are detected.
What happens if a dust boot fails?
A failed boot allows debris into the pin mechanism, which often leads to seized pins and uneven braking performance.
What are the OE reference numbers of this part?
4051001 directly replaces WABCO OE number 012999702.