01173875 S1 Deutz Compatible Compressor Cylinder Head
20 09 50
Summary
This compressor cylinder head is a high-strength component designed for air brake compressors. It ensures proper sealing of the compression chamber and supports stable air output for heavy commercial vehicle systems. Compatible with Deutz engines. Equivalent to OE Deutz 01173875S1.
| EAN Code | 8699031041827 |
|---|
Ready to Order
Compatible OEM Codes
-
KNORR-BREMSE
- LP1332 S1
- LP1327 S1
- LK1549 S1
- LK1534 S1
- LK1524 S1
- LK1504 S1
- LK1503 S1
- LK1500 S1
- LK1314 S1
- LK1309 S1
- LK1304 S1
- LK1303 S1
- LK1302 S1
-
DEUTZ
- 01179230 S1
- 01178041 S1
- 01175309 S1
- 01173877 S1
- 01173876 S1
- 01173875 S1
- 01173873 S1
- 01173871 S1
- 01173870 S1
- 01173868 S1
- 01173863 S1
- 01173305 S1
- 01172908 S1
Description
What does a compressor cylinder head do?
This compressor cylinder head serves as the critical cast service component that sits atop the air brake compressor cylinder block. It seals the compression chamber from above, allowing workshop technicians to rebuild a compressor in place rather than replacing the entire unit. By providing the necessary seats for inlet and discharge valves, this part directly governs both the air output and the running temperature of the compressor system.Compatibility and engine fitment
This specific component is engineered for compatibility with Deutz engines. It ensures precise sealing and structural integrity under high-pressure operating conditions common in heavy commercial vehicle applications.Installation and maintenance guidance
When performing maintenance, technicians should inspect the internal air passages and cooling cavities for any signs of wear or blockage. Ensuring a clean mating surface during installation is vital for maintaining optimal compression and preventing air leaks within the pneumatic system.Selection and troubleshooting
For accurate fitment, always verify the compressor's specific architecture, as head designs vary between single-cylinder and twin-cylinder configurations.OE cross-reference
20 09 50 (Compressor Cylinder Head) is the equivalent of the Deutz OE number. This part directly replaces Deutz OE number 01173875S1.Other OEMs
DEUTZ
- 01179230 S1
- 01178041 S1
- 01175309 S1
- 01173877 S1
- 01173876 S1
- 01173875 S1
- 01173873 S1
- 01173871 S1
- 01173870 S1
- 01173868 S1
- 01173863 S1
- 01173305 S1
- 01172908 S1
KNORR-BREMSE
- LP1332 S1
- LP1327 S1
- LK1549 S1
- LK1534 S1
- LK1524 S1
- LK1504 S1
- LK1503 S1
- LK1500 S1
- LK1314 S1
- LK1309 S1
- LK1304 S1
- LK1303 S1
- LK1302 S1
Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| DEUTZ | |||
| KNORR-BREMSE |
FAQ
What is the function of a compressor cylinder head?
It acts as the top cover for the cylinder block, sealing the compression chamber and housing the inlet and discharge valve seats to manage air output.
Can this part be used to rebuild an existing compressor?
Yes, this component allows a workshop technician to rebuild a compressor in situ, providing a cost-effective alternative to replacing the entire unit.
How do I ensure the head fits my engine?
Selection must be based on the specific architecture of your compressor, as designs vary between single-cylinder, twin-cylinder, air-cooled, or water-cooled types.
What are common signs of a faulty cylinder head?
Technicians may notice irregular air output, overheating due to blocked cooling cavities, or air leaks around the cylinder block interface.
What are the OE reference numbers of this part?
20 09 50 directly replaces Deutz OE number 01173875S1.