MAN Cab Tilting OEM Numbers and VADEN Equivalents

MAN Cab Tilting OEM Numbers and VADEN Equivalents

MAN Cab Tilting OEM Numbers and VADEN Equivalents

Find the VADEN cab tilting hose that matches your MAN OEM number. The table lists 60 MAN OEM numbers matched to 18 VADEN parts, each linked to its product page.

MAN Cab Tilting Hose: OEM to VADEN Cross Reference

The cab tilting system tips the cab forward so the engine and the parts beneath it can be reached; its hoses carry hydraulic fluid between the tilt pump and the tilt cylinder. Find the MAN OEM number on your hose in the left column; the right column shows the matching VADEN part number. Before ordering, check the OEM number and the technical data on the product page; the vehicle manufacturer's service documentation is the reference.

Related pages

Category: Cab Tilting

All VADEN parts in this category with photos and technical data.

Go to category →
Cab Tilt Pump

How the cab tilt pump works, common faults and what to check before replacing it.

Read the guide →
VADEN parts for MAN

MAN models, engines and part groups covered by VADEN.

MAN parts →
MAN OEM cross reference

All MAN part groups with OEM number tables.

All MAN OEM pages →

Other MAN OEM cross reference pages

Air Brake Compressor Repair Kits Water Pumps Fan Brake Caliper Repair Kits Flexible Pipe Air Compressor Air Dryer Valves Brake System: other parts Pressure Limiting Valves Clutch Servo Engine: other parts Relay Valves Gearbox: other parts Unloader Valves Steering Pumps ALB Load Sensing Valves Exhaust Manifolds Radiator Oil Sumps Gearbox Housing Injector Pipe Engine Oil Cooler Brake System Connection Components Master Cylinders Oil Pumps Clutch: other parts Quick Release Valves 4-Circuit Protection Valves Trailer Control Valves Suspension: other parts Exhaust Gas Flaps Exhaust Brake Fuel Filters Fuel System: other parts Cooling System: other parts Electric System: other parts

Frequently asked questions

How do I find the VADEN part for my MAN cab tilting hose OEM number?

Look up the OEM number on your hose in the MAN OEM number column; the VADEN part number in the same row is the matched equivalent. Both numbers link to their product pages, where you can check the technical data before ordering.

When should a cab tilting hose be replaced?

Replace the hose if you see hydraulic fluid leaks, cracks, swelling or chafing on the outer cover. A cab that tilts slowly or does not hold its position can point to a leaking hose, but the pump, cylinder and fluid level should also be checked; follow the vehicle manufacturer's service documentation.

Are VADEN cab tilting hoses original MAN parts?

No. VADEN parts are aftermarket replacement parts, not original MAN parts; the MAN name and OEM numbers are shown only to indicate compatibility. Confirm the match with the OEM number and the product data, and treat the vehicle manufacturer's service documentation as the reference.

Top Scroller