Knorr-Bremse Levelling Valve OEM Number Cross Reference

Knorr-Bremse Levelling Valve OEM Number Cross Reference

Knorr-Bremse Levelling Valve OEM Number Cross Reference

Match 50 Knorr-Bremse levelling valve OEM numbers with 43 VADEN aftermarket parts, then check fitment on each product page before ordering.

Knorr-Bremse levelling valve OEM numbers and VADEN equivalents

A levelling valve controls the air flow to the air suspension bellows and keeps ride height constant as the load changes in commercial vehicles. Search the table for the OEM number on your existing part and open the matching VADEN part number to see its product page. VADEN parts are aftermarket, not original Knorr-Bremse parts: compatibility is confirmed by the OEM number and the product page data, and the vehicle manufacturer's service documentation is the final reference.

Related pages

Category: Levelling Valves

All VADEN parts in this category with photos and technical data.

Go to category →
Levelling Valve: Faults, Replacement & Maintenance Guide

For fault symptoms, replacement steps and maintenance tips, read our levelling valve guide:

Read the guide →
Knorr-Bremse OEM cross reference

All Knorr-Bremse part groups with OEM number tables.

All Knorr-Bremse OEM pages →

Other Knorr-Bremse OEM cross reference pages

Air Dryer Valves Air Processing Units Air Compressor Air Brake Compressor Repair Kits Multi-Circuit Protection Valves 4-Circuit Protection Valves Clutch Servo Brake Caliper Repair Kits ECAS Solenoid Valves Brake System: other parts Brake Caliper Carrier Complete Brake Caliper Clutch: other parts Pressure Limiting Valves Gearbox: other parts

Frequently asked questions

How do I find the VADEN equivalent of Knorr-Bremse levelling valve OEM numbers?

Read the OEM number on the valve body or label, or in the parts documentation, and search for it in the table on this page. The VADEN part number in the same row links to its product page, where you can compare connections and mounting details before ordering.

What should I check when replacing a levelling valve?

Secure the chassis before releasing air from the suspension. Note the mounting position, the condition of the lever arm and linkage rod, and the port layout of the old valve before removing it. After installation, ride height must be set according to the vehicle manufacturer's service documentation.

Are VADEN levelling valves original Knorr-Bremse parts?

No. VADEN parts are aftermarket parts, not original Knorr-Bremse parts. Knorr-Bremse OEM numbers are used only for cross reference; compatibility is confirmed by the OEM number and the product page data, and the vehicle manufacturer's service documentation is the final reference.

Top Scroller