Mercedes-Benz Actros MP4 / MP5 (EURO6) Spare Parts: OE Quality Across Every System, From Air Brakes to the Engine, with VADEN ORIGINAL

The Mercedes-Benz Actros MP4 / MP5 is the flagship of the modern heavy tractor generation, built to the EURO6 emissions standard. Operating in the toughest conditions, from long-haul transport to heavy construction logistics, these vehicles demand high durability and OE-level precision in every system — from the air brake system to the powertrain, and from the engine to cooling, fuel, suspension and steering. VADEN ORIGINAL goes beyond brake compressors alone, offering a total of 132 compatible spare parts across 8 different systems for the Actros MP4 / MP5 (EURO6), giving fleet operators and workshops a reliable solution under one roof.

The Actros MP4 (post-2011) and MP5 (post-2018) series meet EURO6 regulations with the OM470 and OM471 engine families. VADEN ORIGINAL manufactures every part it produces for these vehicles on IATF 16949 and ISO 9001 certified production lines, using the dimensions and performance values of original (OE) products as the reference. As a result, each part works with the same mounting points and the same pressure and torque values as the vehicle's original equipment.

VADEN ORIGINAL Product Systems for the Actros MP4 / MP5 (EURO6)

The distribution of VADEN ORIGINAL parts compatible with the Mercedes-Benz Actros MP4 / MP5 (EURO6) across the following 8 main systems is as follows:

• Air Brake Compressors — 80 parts (compressors + compressor spare/repair parts)
• Transmission — 13 parts (shifting cylinder, transmission housing components)
• Engine — 12 parts (oil sump, flywheel housing, exhaust manifold gasket)
• Brake Caliper — 11 parts (guide pin, bushing, dust boot, repair kit)
• Cooling System — 7 parts (water pump, thermostat, expansion tank, fan)
• Fuel System — 6 parts (fuel filter, water separator filter, AdBlue filter)
• Suspension (ECAS) — 2 parts (ECAS solenoid valve, repair kit)
• Steering — 1 part (steering pump)

Air Brake Compressors: VADEN ORIGINAL Solutions for the Mercedes-Benz Actros MP4/MP5 EURO6

On Mercedes-Benz Actros MP4/MP5 EURO6 models, the air brake compressor is the central component that produces the compressed air needed by the vehicle's brake, suspension and pneumatic systems. Driven by the engine, the compressor compresses air in its cylinders and delivers it, via the dryer and air tanks, to the brake valves, air-sprung suspension and other pneumatic actuators, ensuring the vehicle runs safely and in a balanced manner. Even a small loss of efficiency in compressed air production directly affects brake response time and suspension comfort; this is why the compressor and its repair/spare parts must be of OE quality. In the VADEN ORIGINAL portfolio for the Actros MP4/MP5 EURO6, a total of 80 compatible parts are offered, ranging from complete single/twin-cylinder compressors to pistons, piston rings, cylinder head, valve plate, cooling plate, crankshaft, connecting rod, crankshaft flange, repair kit, cylinder liner set, housing, water pipe and air intake pipe. All products are manufactured under IATF 16949 and ISO 9001 quality management systems, targeting OE-equivalent performance and long service life.

1100 400 001 — EURO6 Twin-Cylinder Compressor

Mercedes-Benz OE equivalent:

• 001 130 60 15
• 001 130 62 15
• 001 130 64 15
• 001 130 89 15
• 471 130 32 15

Developed for OM471-engined Actros 1842/1845/1848/1851 models, this complete twin-cylinder compressor delivers OE-level performance in compressed air generation with VADEN ORIGINAL quality.

1100 410 001 — EURO6 Twin-Cylinder Compressor

Mercedes-Benz OE equivalent:

• 000 930 09 53
• 001 130 94 15
• 936 130 22 15
• 936 130 31 15

Also used on the Citaro, Econic and Intouro bus platforms alongside the Actros, this compressor's broad application range gives fleet operators practical stock management with a single part number.

1100 420 001 — EURO6 Twin-Cylinder Compressor

Mercedes-Benz OE equivalent:

• 001 130 55 15
• 001 130 74 15
• 001 130 82 15
• 471 130 19 15
• 471 130 24 15

Also positioned as a Knorr-Bremse equivalent, this compressor meets both OE and common aftermarket needs in a single product for Actros EURO6 vehicles.

1100 430 001 — EURO6 Twin-Cylinder Compressor

Mercedes-Benz OE equivalent:

• 001 130 80 15
• 001 130 83 15
• 936 130 14 15
• 936 130 15 15
• 936 130 37 15

Designed for the OM470-engined Actros 1824-1835 series, this compressor ensures uninterrupted compressed air flow on the lighter and mid-segment Actros models.

1100 450 001 — EURO6 Single-Cylinder Compressor

Mercedes-Benz OE equivalent:

• 001 130 76 15
• 001 130 97 15
• 002 130 44 15
• 002 130 72 15
• 936 130 12 15

Used on the Actros 1824-1830 and Multi Class bus series, this single-cylinder compressor is an efficient solution for vehicles with lower compressed air volume needs, thanks to its more compact design.

Complementary parts frequently needed during compressor overhaul and maintenance are also offered with VADEN ORIGINAL assurance:

• 11 38 11 — Cylinder Head: A critical part that restores sealing and pressure balance during compressor overhauls.
• 11 38 12 — Valve Plate: Houses the air intake/outlet valves, preserving the compressor's compressed air output.
• 105 150 — Piston Ø100.00 mm (STD): Standard-size piston that forms the basis of compression performance.
• 105 200 — Piston Ring Set Ø100.00 mm (STD): Piston ring set that provides in-cylinder sealing and prevents pressure loss.

Mercedes-Benz Actros MP4 / MP5 (EURO6) Brake Caliper Wear and Maintenance Parts

On Mercedes-Benz Actros MP4 and MP5 EURO6 models, the disc brake caliper is a critical component that generates pad pressure in response to commands from the air circuit, ensuring the vehicle brakes safely and evenly. Trouble-free caliper operation depends on wear parts such as the guide pin, bushing, dust boot and grease being fully compliant with technical specifications and regularly maintained. If these parts wear or become damaged over time and are not replaced, caliper slide sticking, uneven pad wear and reduced brake performance can result. VADEN ORIGINAL offers a total of 11 compatible products for this vehicle group, covering every stage of caliper maintenance in full.

3551024 — Caliper Guide Pin Repair Kit

Mercedes-Benz OE equivalent:

• 000 420 46 82

This repair kit offers a complete overhaul solution by combining the caliper guide pin together with the sealing and lubrication elements of the slide system in a single package. Thanks to its broad compatibility, also usable in Mercedes-Benz, MAN, Scania, DAF, ZF and Knorr-Bremse brake systems, it provides a practical solution for workshop stock. Manufactured with VADEN ORIGINAL assurance, this repair kit is produced to IATF 16949 and ISO 9001 quality standards and delivers OE-level performance on Actros MP4/MP5 EURO6 vehicles.

Other wear and complementary parts of the caliper system are also offered with VADEN ORIGINAL quality:

• 3501005 — Caliper Guide Pin: The slide pin that enables the caliper's sliding motion.
• 3502002 — Dust Boot: Provides dust and moisture sealing in the guide pin area.
• 3505001 — Bushing: A bearing bushing for low-friction motion in the caliper mount.
• 3524003 — Grease (7 g): A special caliper grease used to lubricate the guide pin and bushing areas.

This 11-part VADEN ORIGINAL product family for the Actros MP4/MP5 EURO6 covers the caliper guide pin, dust boot, bolt, bushing, cover and repair kit subgroups, allowing workshops to perform full caliper maintenance from a single source.

Engine System: Structural and Sealing Parts for the Actros MP4/MP5 EURO6 OM470/OM471

The OM470/OM471 EURO6 engines serving in Mercedes-Benz Actros MP4 and MP5 bodies are subject to continuous high thermal and mechanical stress over long distances under heavy loads. The oil sump, flywheel housing, exhaust manifold gasket, injector holder, various pipes and gaskets that preserve the engine's structural integrity guarantee both uninterrupted lubrication flow and full sealing between the engine block and the powertrain. The slightest mismatch or quality shortfall in these critical components can lead to faults such as oil leaks, exhaust leaks, or vibration around the flywheel area. VADEN ORIGINAL offers a wide product range of 12 compatible parts in total for this vehicle group, manufactured through production processes compliant with IATF 16949 and ISO 9001 quality standards, serving fleet owners and workshops.

449 01 0005 — Oil Sump

Mercedes-Benz OE equivalent:

• 471 010 56 13
• 471 010 61 13
• 471 010 72 13

Designed specifically for the OM471 engine, this oil sump supports the continuity of the lubrication circuit by ensuring the engine oil is safely stored and cooled.

0101 203 — Flywheel Housing (Actros/Arocs EURO6 OM471)

Mercedes-Benz OE equivalent:

• 471 015 03 03
• 471 015 96 02

Developed specifically for the OM471 engine, this flywheel housing protects the connection area between the engine and the transmission and safeguards the mechanical parts around the flywheel from external factors.

0101 293 — Exhaust Manifold Gasket

Mercedes-Benz OE equivalent:

• 471 203 07 80

Resistant to high exhaust gas temperatures, this gasket provides full sealing at the manifold joint surface, preventing exhaust leaks.

0101 201 — Oil Sump Pipe

Mercedes-Benz OE equivalent:

• 960 520 20 06

This pipe, which connects the oil sump to the lubrication circuit, supports uninterrupted circulation of engine oil at the correct pressure.

For the injector holder and other complementary gasket-group parts, you can browse the VADEN ORIGINAL product catalog to find fully compatible, original-quality solutions for your Actros MP4/MP5 EURO6 engine.

Transmission System: VADEN ORIGINAL Solutions for the Mercedes-Benz Actros MP4 / MP5 EURO6

On Mercedes-Benz Actros MP4 and MP5 EURO6 models, the automated manual transmission (AMT) performs gear shifts without driver intervention, via compressed-air-assisted actuators. The shifting cylinders located inside the transmission housing convert the electronic signal from the control unit into compressed air energy, precisely moving the shift forks; the transmission housing body and its gaskets, meanwhile, guarantee the sealing of this compressed air circuit and the lubrication system. Wear or leakage occurring in any of these components can result in delayed gear shifts, jerking, or complete failure. VADEN ORIGINAL offers a wide product range of 13 compatible parts in total for this vehicle group, backed by production compliant with IATF 16949 and ISO 9001 quality standards.

303 11 0061 — Shifting Cylinder

Mercedes-Benz OE equivalent:

• 001 260 84 63
• 002 260 95 63
• 003 260 39 63

This gear-shift actuator, positioned at the heart of the automated transmission, converts compressed air into mechanical motion to position the shift fork at the correct time and in the correct location; manufactured with VADEN ORIGINAL quality, this cylinder preserves original performance and shift precision.

0101 257 — Transmission Housing Gasket

Mercedes-Benz OE equivalent:

• 014 997 36 47
• 014 997 51 47
• 020 997 67 47

This gasket, which seals the transmission housing body against the cover or actuator mounting surfaces, prevents compressed air and oil leaks, contributing to the long-lasting and reliable operation of the transmission system.

In addition to the two featured products above, other complementary components in the VADEN ORIGINAL Transmission Housing Body/Gasket and Repair Kit subgroups are also available within the compatible product range listed on the shifting cylinder and gasket product pages, allowing comprehensive maintenance of the Actros MP4/MP5 EURO6 transmission system to be carried out reliably under a single brand.

Cooling System Parts for the Mercedes-Benz Actros MP4 / MP5 EURO6

On Mercedes-Benz Actros MP4 / MP5 EURO6 models, the engine must operate within a stable temperature range over long distances under heavy load; the cooling system that maintains this balance continuously circulates coolant between the engine block, radiator and expansion tank, preventing overheating and guaranteeing efficient, reliable engine operation. The water pump provides fluid circulation, the thermostat controls flow direction based on temperature, the expansion tank maintains pressure and volume balance in the system, and the fan blade supports airflow through the radiator to complete the cooling process. VADEN ORIGINAL fully covers all critical cooling system components for this vehicle group with a total of 7 compatible parts.

525 01 0044 — Water Pump

Mercedes-Benz OE equivalent:

• 936 200 07 01
• 936 200 12 01
• 936 200 16 01

Ensuring uninterrupted circulation of coolant within the engine, this water pump delivers OE-level performance in Actros MP4/MP5 EURO6 engines with VADEN ORIGINAL quality.

0101 468 — Thermostat

Mercedes-Benz OE equivalent:

• 471 200 29 15
• 471 200 36 15
• 471 200 62 15

Precisely controlling engine temperature, this thermostat regulates coolant flow direction, allowing the engine to reach optimum operating temperature as quickly as possible.

543 01 0010 — Expansion Tank

Mercedes-Benz OE equivalent:

• 960 501 42 03

Keeping the coolant reserve and system pressure in balance, this expansion tank offers sealing and durability with VADEN ORIGINAL production quality.

529 01 0017 — Fan Blade

Mercedes-Benz OE equivalent:

• 471 205 06 06

Increasing airflow through the radiator, this fan blade contributes to sustained effective cooling, particularly on Actros models traveling at low speed under high load.

All VADEN ORIGINAL cooling system parts pass through production processes compliant with IATF 16949 and ISO 9001 quality standards, delivering OE-level reliability for Mercedes-Benz Actros MP4/MP5 EURO6 vehicles.

Mercedes-Benz Actros MP4 / MP5 EURO6 Fuel System — VADEN ORIGINAL Filter and Line Solutions

On Mercedes-Benz Actros MP4 and MP5 EURO6 vehicles, the fuel system plays a critical role in both fuel economy and emissions compliance by directly affecting the cleanliness of the fuel delivered to the engine and the reliability of the AdBlue dosing line. Components such as the fuel filter, water separator filter, AdBlue filter and injection line pipe protect the high-pressure injection system from water, particulates and contaminants, ensuring EURO6 emissions standards are met sustainably. The VADEN ORIGINAL product range for this vehicle group includes a total of 6 compatible parts, all manufactured through production processes compliant with IATF 16949 and ISO 9001 quality standards.

0101 178 — Water Separator Fuel Filter

Mercedes-Benz OE equivalent:

• 960 470 15 90
• 960 470 17 90
• 960 477 00 02

The VADEN ORIGINAL 0101 178 water separator fuel filter effectively separates water from the fuel, protecting the injection system from corrosion and faults; it helps preserve fuel quality and system life in Actros MP4/MP5 EURO6 engines.

• For other compatible fuel system parts (including fuel filter, AdBlue filter and injection line pipe), you can browse the VADEN ORIGINAL product page.

Suspension (ECAS) System VADEN ORIGINAL Parts for the Mercedes-Benz Actros MP4 / MP5 EURO6

On Mercedes-Benz Actros MP4 and MP5 EURO6 models, the Electronically Controlled Air Suspension (ECAS) is a critical comfort and safety system that automatically adjusts vehicle height according to load condition, axle pressure and driving conditions. At the heart of this system, the ECAS solenoid valve precisely controls chassis height by directing compressed air from the compressor into the air bellows or venting it out; this enables a balanced ride height to be achieved during loading/unloading on ramps, during trailer coupling, and while driving. Even the slightest leak in the compressed air circuit or a valve fault can disrupt the vehicle's level adjustment, negatively affecting both ride comfort and brake/suspension balance. The VADEN ORIGINAL catalog for this vehicle group includes a total of 2 compatible parts, with the featured ECAS component and repair kit detailed below.

303 04 0076 — ECAS Solenoid Valve

Mercedes-Benz OE equivalent:

• 001 327 06 25

This solenoid valve manages air suspension height control on Actros MP4/MP5 EURO6 vehicles, ensuring the ECAS system responds correctly and quickly; it is manufactured with VADEN ORIGINAL quality in compliance with IATF 16949 and ISO 9001 standards.

• The compatible Repair Kit for the ECAS solenoid valve prevents compressed air leaks during periodic maintenance of the gaskets and seals in the valve body, providing an economical way to restore the system's original performance.

Steering System: VADEN ORIGINAL Steering Pump for the Mercedes-Benz Actros MP4 / MP5 EURO6

On Mercedes-Benz Actros MP4 and MP5 EURO6 models, the component that reduces the force the driver applies to the steering wheel, determining both maneuvering precision and driving comfort, is the steering pump that supplies pressure to the hydraulic steering system. Driven by the engine, this pump delivers hydraulic fluid at a set pressure to the steering box, directly affecting driver comfort particularly during frequent maneuvering in city traffic and low-speed parking maneuvers; even the slightest drop in its performance is felt as stiffness, delay or irregular response in the steering. The VADEN ORIGINAL catalog for this vehicle group includes a total of 1 compatible steering pump, detailed below together with its OE equivalent information.

330 01 0030 — Steering Pump

Mercedes-Benz OE equivalent:

• 960 460 02 80

Manufactured for the Actros MP4/MP5 EURO6, this steering pump stably supplies the required pressure in the hydraulic steering system, offering a driving experience equivalent to original part performance. VADEN ORIGINAL also puts this part through production processes compliant with IATF 16949 and ISO 9001 quality standards, guaranteeing durability and OE compatibility.

Why VADEN ORIGINAL for the Actros EURO6?

• OE Compatibility: Every part is manufactured as a direct equivalent of Mercedes-Benz original equipment numbers, with the same mounting, pressure and torque values.
• Certified Quality: IATF 16949 and ISO 9001 certified production; traceability and consistent quality on every product.
• A Complete Solution from a Single Supplier: 132 parts across 8 systems for a single vehicle family; every need from air brakes to the engine, and from the transmission to the suspension, met at a single address.
• Economical Repair: OE-standard, low-cost overhaul with repair kits and spare parts instead of complete replacement.
• Durability: Materials and workmanship designed for heavy-duty conditions ensure long service life and low total cost of ownership.

Frequently Asked Questions (FAQ)

In which systems does VADEN ORIGINAL offer parts for the Mercedes-Benz Actros EURO6?

VADEN ORIGINAL offers a total of 132 compatible parts across 8 main systems for the Actros MP4 / MP5 (EURO6): air brake compressors (80), transmission (13), engine (12), brake caliper (11), cooling system (7), fuel system (6), suspension/ECAS (2) and steering (1). This means the majority of the vehicle's maintenance and repair needs can be met with OE quality from a single supplier.

Are the products really compatible with Mercedes-Benz OE numbers?

Yes. From compressors to the thermostat, and from the exhaust manifold gasket to the ECAS solenoid valve and steering pump, many parts are manufactured as direct equivalents of the relevant Mercedes-Benz OE numbers. The relevant OE numbers are listed in each product section.

How do I find the right part for my vehicle?

The most reliable method is to compare the Mercedes-Benz OE number on the current part in your vehicle with the lists above. For compressors, the engine type and horsepower version of the Actros MP4 / MP5 (e.g. 1842, 1845, 1848) also help identify the correct model.

Can I use a repair kit instead of replacing the complete part?

Yes. VADEN ORIGINAL offers numerous overhaul sets, from compressor repair kits to the caliper guide pin repair kit, and from the shifting cylinder to ECAS solenoid valve repair kits. These parts allow economical, OE-standard repair instead of complete replacement.

To what quality standards are the products manufactured?

All VADEN ORIGINAL parts are manufactured on IATF 16949 and ISO 9001 certified production lines, using the dimensions and performance values of original products as the reference.

Conclusion

The Mercedes-Benz Actros MP4 / MP5 (EURO6) delivers the highest efficiency and safety with the right spare parts. From air brake compressors to engine, transmission, cooling, fuel, suspension and steering parts, VADEN ORIGINAL is a reliable supply partner for Actros fleets with more than 132 compatible components across 8 systems. Discover all VADEN ORIGINAL solutions for the Actros EURO6: VADEN ORIGINAL products compatible with the Mercedes-Benz Actros MP4 / MP5.